Yamaha 101 - Manual (Page 11)

The Input Setting popup window will appear.
2. While playing the instrument, turn the GAIN knob
up to adjust the input level. The meter on the
right hand side of the Input Setting screen should
be around the –12 to -6 dB mark when the
instrument is at its maximum level.
Once you reach the 0 dB mark the signal will become distorted. Setting the input level at
around -12 to -6 allows for changes in dynamics during live performance.
4. Turn the MONITOR/PHONES knob up to the desired listening level.
Assigning the Input Signal to a Track
1. In the Quick Navigate section press the
[RECORD] key until the DIRECT page of the
RECORD screen is displayed.
The [INPUT SEL] keys and the [TRACK SEL] keys will now be red and blinking.
2. Press the [INPUT SEL] key for the input channel that you are going to
record from.
The [INPUT SEL] that was pushed will now be solid red, and the remaining
[INPUT SEL] keys will no longer be blinking.
8