Yamaha DDP-10 - Manual (Page 26)

22
To enjoy listening to a source with the Dolby Digital
(AC-3) decoded
1. Turn down the volume to a minimum level on the amplifier or
receiver.
2. Turn on the power of this unit and other audio/video units to be
used.
3. On the amplifier or receiver, select the “6-ch. (or 5-ch.) discrete
signals” sent from this unit as the input source.
4. Select the input source to play.
To select the audio/video unit connected to the DVD/LD jack(s) of
this unit, press the DVD/LD button.
To select the audio/video unit connected to the TV/DBS jack(s) of this
unit, press the TV/DBS button.
5. If desired, select another program.
* For details about the sound field programs, refer to page 23.
6. Play the source and turn up the volume to a desired listening level
gradually on the amplifier or receiver.
OPERATIONS
or
The program which was used when the same input source was
selected the last time will automatically recalled and its name is
shown.
The name of selected input source lights up.
POWER
TV/DBS DVD/LD
DIGITAL T DVD/LD P
DIGITAL DIGITAL
MOVIE THEATER
ENHANCED