Yamaha EM-202VCD - Manual (Page 47)

E-39
English
PHONES
POWER
DISC 1 2 3
PROGRAM
ECHO ECHO
MUSIC
USER MEMORY
INPUT SELECTOR VCR/LD-TV/VCD-CD/TUNER/TAPE•MD/AUX VOLUME
RANDOM
DISPLAY MIC
MIN MAX
MIC MIXING
REPEAT TIME MEMORY AUTO/MAN'L
HOUR PRESET/TUNING/BAND A/B/C/D/E MIN TIME ADJ TIMER
OPEN/
CLOSE
DISC
CHANGE
VIDEO CD
Version 2.0 / Playback Control
➂
ON TIME/time setting mode
[“ON TIME” appears on the display, and soon it is
changed to a time setting mode.]
Set to the time when you want to begin the timer play
by using the HOUR button and the MIN button.
➃
OFF TIME/time setting mode
[“OFF TIME” appears on the display, and soon it is
changed to a time setting mode.]
If necessary, set to the time when you want to finish
the timer play (to turn this unit into the standby mode)
by using the HOUR button and the MIN button. Even
if you do not set the time, it has already been set so
that the timer play finishes after 1 hour.
Note
The TIMER button functions also in the time (ON
TIME or OFF TIME) setting mode. (However, it also
turns this unit into the standby mode.)
3
If you will not use this unit until the timer play begins, turn
this unit into the standby mode by pressing the POWER
switch or the TIMER button.
Note
If a timer play setting is made and this unit is not turned into
the standby mode, the source set for the timer play will begin
playing when the time comes in place of the source played at
that time.
To cancel the timer play setting
After the timer play is finished, press the DISPLAY button to
call the current time. While the current time is displayed,
press the TIMER button so that “TIMER” goes out from the
display.
If it is not canceled, this unit will be turned on at the same
time every day, so it can be used as an alarm. However, if
you are planning to go out at that time, cancel the timer play
setting.
*
Unless the AC supply lead is unplugged or there is a
power failure for more than 5 minutes, the time set on the
timer will be retained until it is reset.
How to make time setting in the ON TIME or OFF
TIME mode
For the hour:
Press the HOUR button to change the hour to a higher value.
Press and hold to change continuously.
For the minute:
Use the MIN button and operate it in the same way as you
did to change the hour.
HOW TO USE THE BUILT-IN TIMER
TIME
A
PROG
B C D
+ I0
E
VCD/CD
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
PRESET
INPUT
TIME INDEX
INTRO DIGEST
POWER
DISPLAY SLEEP
MUSIC
FLAT
PROGRAM USER
VOLUME
DISC SKIP RETURN PREV NEXT SELECT
LEVEL
TEST CENTER/REAR
/DELAY ECHO/
KEY
OPEN/CLOSE INDEX MODE TUNER
POWER
2- ➂ , ➃ 3
3 DISPLAY