Yamaha EM-202VCD - Manual (Page 21)

E-13
English
SPEAKER BALANCE ADJUSTMENT
TIME
A
PROG
B C D
+ I0
E
VCD/CD
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
PRESET
INPUT
TIME INDEX
INTRO DIGEST
POWER
DISPLAY SLEEP
MUSIC
FLAT
PROGRAM USER
VOLUME
DISC SKIP RETURN PREV NEXT SELECT
LEVEL
TEST CENTER/REAR
/DELAY ECHO/
KEY
OPEN/CLOSE INDEX MODE TUNER
6
Adjust the sound output levels of the center speaker and
the rear speakers by using the LEVEL control buttons so
that they become almost as same as that of the front
speakers.
● When the test tone is output from the center speaker,
pressing the LEVEL control buttons change the output
level of the center speaker.
● When the test tone is output from the rear speakers,
pressing the LEVEL control buttons changes the output
level of the rear speakers.
* Pressing the + button raises and the – button lowers the
level.
7
If the adjustments have finished, press the TEST button to
cancel the test tone.
* “TEST” disappears from the display.
Notes
● Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the VOLUME control (or the VOLUME keys on the remote
control transmitter) only.
● In step 6, if the center channel mode is in the “PHANTOM”
position, the sound output level of the center speaker
cannot be adjusted. This is because in this mode, the
center sound is automatically output from the left and right
front speakers.
USER NOR TEST PROGRAM MUSIC
PRO LOGIC
100 350 1K 3.5K 10K
USER NOR TEST PROGRAM MUSIC
PRO LOGIC
100 350 1K 3.5K 10K
Adjustable
Adjustable
7
6