ZyXEL Communications 2304R-P1 User Manual

Page 53

Prestige 2304 Support Notes

DHCP Setup

If the Prestige's DHCP server is enabled, the IP pool for the clients can be any of the

three networks.

TCP/IP Setup

Enter the first LAN IP address for the Prestige. This will create the first route in the

enif0 interface.

Edit IP Alias

Toggle to 'Yes' to enter menu 3.2.1 for setting up the second and third networks.

2. Edit the second and third networks in menu 3.2.1 by configuring the Prestige's second and third LAN IP

addresses.

Menu 3.2.1 - IP Alias Setup

IP Alias 1=

Yes

IP Address=

192.168.2.1

IP Subnet Mask=

255.255.255.0

RIP Direction= None

Version= RIP-1

Incoming protocol filters=

Outgoing protocol filters=

IP Alias 2=

Yes

IP Address=

192.168.3.1

IP Subnet Mask=

255.255.255.0

RIP Direction= None

Version= RIP-1

Incoming protocol filters=

Outgoing protocol filters=

Enter here to CONFIRM or ESC to CANCEL:

Key Settings:

IP Alias 1

Toggle to 'Yes' and enter the second LAN IP address for the Prestige. This will create the

second route in the enif0:0 interface.

IP Alias 2

Toggle to 'Yes' and enter the third LAN IP address for the Prestige. This will create the

third route in the enif0:1 interface.