Yamaha DPX-830 - Manual (Page 26)

22
How to set the menus
Following describe how to set AUTO POWER OFF time as an
example.
1. Press the MENU button.
• If no signal is input, the menu does not appear.
2. Press the or button to select a menu to use.
• SETUP menu is selected in this example.
3. Press the ENTER button (or button).
4. Press the or button to select an item to adjust.
5. Set the selected item by pressing the or button.
To exit from the menu:
6. Press the MENU button several times.
Important
• If the MENU button does not function, unplug the
power cable from the wall outlet. Wait about 10
minutes, plug the power cable in, and try again.
SATURATION Unavailable when the input source is HDMI or D-SUB source is an RGB signal.
HUE Available only when the VIDEO or S-VIDEO source is NTSC or 4.43NTSC signal.
SHARPNESS Unavailable when the D-SUB or HDMI source is a computer signal.
PROGRESSIVE MODE Available only when the input signal is TV50, TV60, 480i or 576i.
COLOR SYSTEM Available only when the input source is VIDEO or S-VIDEO.
SET UP LEVEL Unavailable when the input source is HDMI, and also when the D-SUB source is a computer signal.
SCART INPUT Available only when the input source is D-SUB.
HORIZ. POSITION Unavailable when the input source is HDMI.
VERT. POSITION Unavailable when the input source is HDMI.
PHASE Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
TRACKING Available only when the D-SUB source is a computer signal.
OVER SCAN Unavailable when the VIDEO or S-VIDEO source is NTSC, 4.43NTSC, PAL-M, PAL-60 signal.
D-SUB INPUT Available only when the input source is D-SUB except RGBCs (576i) signal.
SYNC NOISE MASK Available when the input source is COMPONENT 720p, 1080i signal and D-SUB 720p, 1080i computer
signal.
CLAMP POSITION Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
CLAMP WIDTH Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
LPF Available only when the COMPONENT or D-SUB source is a 480i/p, 576i/p signal, except RGBCs (576i)
signal.
IMAGE
TV60
SETUP
TV60
SETUP
16:9
0
CINEMA
OFF
OFF
SCREEN ASPECT
VERTICAL
LOCATION
LAMP MODE
AUTO POWER
ON
AUTO POWER
OFF
TV60
OFF
OFF
ON
AUTO POWER ON
AUTO POWER
OFF
SPLASH
SCREEN
OFF
30 min
ON
AUTO POWER
ON
AUTO POWER
OFF
SPLASH
SCREEN