ZyXEL Communications P-660HW-Dx v2 - Manual (Page 9)

P-660HW-Dx v2 Quick Start Guide
9
Note: The fields available in this screen depend on the Mode and Encapsulation you select
5 If you still cannot access the Internet, see Troubleshooting and/or contact your Internet Service Provider
(ISP) for assistance.
7 Setting Up a Wireless Network with OTIST
7.1 About OTIST
ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically
configure the SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-
660HW-Dx v2.
Enable OTIST only if your wireless clients support WPA and OTIST.
You should have already configured wireless settings on the P-660HW-Dx v2 using the wizard.
If you select Disable wireless security using the wireless wizard, the P-660HW-Dx v2 will create a
WPA-PSK automatically.
If you select Manually assign a WEP key using the wireless wizard, the P-660HW-Dx v2 will replace
the WEP key with a WPA-PSK.
You must enable OTIST on the P-660HW-Dx v2 and all wireless clients within three minutes in any
order.