ZyXEL Communications P-660HW-Dx v2 - Manual (Page 3)

P-660HW-Dx v2 Quick Start Guide
3
1 Hardware Connections
1 DSL: Use the gray telephone wire to connect your P-660HW-Dx v2’s DSL port to a telephone jack (or to
the modem port on a splitter if you are using one).
2 ETHERNET: Use the yellow Ethernet cable to connect a computer to an ETHERNET port for initial
configuration and/or Internet access.
3 POWER: Use the included power adaptor to connect an appropriate power source to the POWER socket.
Make sure the power source is on.
4 Push in the POWER button.
5 Look at the lights on the front panel.