Table 17 performance table 18 standards supported, Wall-mounting instructions – ZyXEL Communications PLA-4xx User Manual
Page 75
Appendix A Product Specifications
PLA-4xx Series User’s Guide
75
The following list, which is not exhaustive, illustrates the standards supported in the PLA-4xx.
Wall-mounting Instructions
Complete the following steps to hang your PLA-400/400 v2/401/401 v2
on a wall.
Device Management
Use the PLA-4xx Series Configuration Utility version 3.0.5(AG) to easily
configure the PLA-4xx.
Note: The PLA-4xx Series Configuration Utility version
3.0.5(AG) is only compatible with PLA-4xxs with
the latest firmware installed.
Network Name
Change the powerline network name to only allow the powerline
adapters you specify to join your network.
Firmware Upgrade
Download new firmware (when available) from the ZyXEL website and
use the configuration utility to install it.
Note: You do not need the configuration utility to install
the latest firmware. Follow the instructions in
for installing the latest
firmware.
Note: Only install firmware for your specific model!
Table 17 Performance
FEATURE
DESCRIPTION
Throughput over PHYsical Transport
Medium (PHY)
Supports up to 200 Mbps in half duplex mode
Throughput over UDP
Supports up to 150 Mbps over in-house power/coaxial
lines (LAN port limits to 100 Mbps)
Number of devices in one powerline
network
Supports up to 64 devices in 4 network groups
Table 18 Standards Supported
STANDARD
DESCRIPTION
HomePlug AV
Designed for transmitting audio/video on a home powerline network.
RFC 868
Time Protocol.
RFC 1112
IGMP v1
RFC 1157
SNMPv1: Simple Network Management Protocol version 1
RFC 1901
SNMP v2c Simple Network Management Protocol version 2c
RFC 2236
Internet Group Management Protocol, Version 2.
Table 16 Firmware Specifications
FEATURE
DESCRIPTION