ZyXEL Communications PLA-4xx - Manual (Page 55)

Chapter 6 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
55
6.0.5 Setting Up a New Network with a New Adapter
This section shows you how to use your new powerline adapters to set up a new powerline
network separate to your existing network.
The figure below shows two powerline networks in a house. The first network (1) shows the
home computer connected to a printer and access to the Internet. The second network (2) has
no Internet access but with a media adapter such as the ZyXEL DMA-1100P you can use your
TV to watch movies and play games which are stored on a computer.
Figure 36 Add New Adapters to Make a Second Network
1 Connect your new powerline adapter and open the configuration utility as shown in
Section 6.0.5 on page 55 . The screen shown below appears.
2 Type a Network Name that is different from the Network Name for your existing
network. Make sure you use the same new Network Name for all new adapters you
want to add to your new network.
Internet
2
1