Zebra Technologies A100 - Manual (Page 16)

Zebra )100 User’s Guide
Setting Up the Software
You will need to install the Zebra A100 Printer Driver on your computer
before you can operate your printer. Also included for your use with the
Zebra A100 printer is BAR-ONE software, a powerful label design program.
System Requirements
The Zebra A100 software works with most IBM
®
-compatible personal com-
puters available today. The software may be installed and up-and-running
within a few minutes. Refer to the on-line help system and to the Read-Me
file for further information and/or last-minute updates. The software may be
installed on any computer that meets the following system requirements:
* A 386 16MHz computer will work but print speed may be slightly reduced.
System
Requirements
)100 Printer Driver BAR-ONE
Minimum Recom-
mended
Minimum
Recom-
mended
Processor
486SX* 486SX 486SX 486SX
Hard disk
3 MB 10 MB 3 MB 10 MB
Memory 4 MB RAM 8 MB RAM 4 MB RAM 8 MB RAM
Interface Parallel RS-232 Parallel
Display
VGA SVGA VGA SVGA
Floppy drive
3½ ² 3½ ²
Operating system
Windows™ 3.1 or higher
or Windows 95 Windows 3.1 or higher, Windows
NT, or Windows 95; OS/2
Mouse
RS-232 or PS/2 RS-232 or PS/2
55501lr3 Page 11 Wednesday, March 26, 1997 1:08 PM