Xerox CopyCentre C118 - Manual (Page 13)

2 Operation with Windows 95, Windows 98 and Windows Me
Xerox WorkCentre 118 Postscript® User Guide 13
Output Settings Tab Settings
This section describes the settings in the Output Settings tab.
NOTE: You can restore defaults by clicking [Restore Defaults].
Settings
Output Size - Selects the size of the paper used for output. The output is automatically
enlarged or reduced, depending on the paper size selected here and the paper size
selected in the Paper tab.
For example, when you select [B5] in Paper Size on the Paper tab, and select [A4] as
the Output Size, the output is automatically enlarged and printed.
When you select [None], the job is printed based on the Paper Size selected in the
application.
Banner Sheet - Specifies whether or not to add a banner sheet to printed output.
When [Use Printer Settings] is selected, the printer settings are used.
When [Printer Start Page] is selected, outputs the banner sheet using the first sheet.
E-Mail Job Confirmation - Specifies whether or not to use the Mail Notify feature to
notify the end of the print job via e-mail. Default is [Off].
E-Mail Address - Specifies the e-mail address for the Mail Notify feature.
Display warning message about Output Settings - When printing, the printer driver
checks whether the Output Size setting conflicts with other settings.