Xerox COLOR LASER PRINTER 7750 - Manual (Page 2)

Using Color
Phaser® 7750 Color Laser Printer
2-36
Image Processing
The differences between the way your printer and monitor produce color explain why your
printed document can look different from what you see on your screen. To compensate for
these differences, the colors are converted by your printer using image processing. Image
processing is the process of translating your computer file into printer toner. Your printer uses
TekColor Correction to translate color from your computer to your printer.
Adjusting Color Using TekColor Correction
The TekColor correction options provide simulations of different color devices. Automatic is
the default correction for general image processing. See the following table to determine what
option you want to use.
For more information on color matching and ICC profiles, go to www.xerox.com/office/
infoSMART .
Category TekColor Correction Description
Automatic Applies the best color correction to each graphic
element: text, artwork, and photographs.
Office Color sRGB Display Approximates the colors on a computer display.
sRGB Vivid Produces brighter, more saturated colors than sRGB
Display.
Press Match SWOP Press Matches Specifications for Web Offset Publications.
Euroscale Matches FOGRA glossy paper specification.
Commercial Approximates U.S. commercial press target.
SNAP Press Matches Specifications for Newsprint Advertising
Production.
Japan Color Matches Japan Color 2001 specification.
Custom colors Uses a custom color correction developed for your
printer using PhaserMatch software.
None Applies no color correction. Use with other color
management tools, such as ICC (International Color
Consortium) profiles, ColorSync, or the Phaser 7750
PANTONE Color Chart.
Black and White Converts all colors to shades of gray.
User Printer Front
Panel Setting Uses the color correction set in the printer. The color
correction can be set in the printer using either the
front panel or the CentreWare software (if available).