Yamaha DIGITAL MIXING STUDIO N8 - Manual (Page 50)

Using the n8/n12 with Software Other Than Cubase
Owner’s Manual
50
English
To remotely control your DAW from the n8/n12, make
the following settings in the DAW:
Type of remote controller
Mackie Control
MIDI ports used for connecting the remote controller
Windows
Input
n8 Remote (n8) n12 Remote
(n12)
Output
n8 Remote (n8) n12 Remote
(n12)
Macintosh
Input Remote
Output Remote
Logic Pro automatically recognizes it as the Mackie
Control settings when the n8/n12 is connected to
your computer.
For Digital Performer Users
To input and output the MIDI signals with D.P.6, you
will need to set the MIDI driver.
1. Select [Application] → [Utilities] → [Audio MIDI
Setup] to display the “Audio MIDI Setup”
window. On Mac OS X 10.6, then select
[Window]
→ [Show MIDI Window] to display
the “MIDI Studio” window.
The MIDI driver is shown as “n8” or “n12.”
2. Click [Add Device] twice to add two external
devices.
3. Connect the input/output plugs for the MIDI
driver to those for the new external devices.
NOTE
This setting may be unnecessary for the latest
version of your DAW software.
NOTE