Zhone Technologies 6218-I2 - Manual (Page 41)

Quick Setup with Auto-Connect Disabled
6218-A2-ZB23-10 6218-I2 Wireless Router User’s Guide 41
8 Enter the settings specified by your ISP and click on Next. The Device
Setup screen appears.
Figure 29: Device Setup
9 If desired, configure configure the DSL Router IP address and Subnet
Mask for the LAN interface to correspond to your LAN's IP Subnet. If
you want the DHCP server to automatically assign IP addresses, then
enable the DHCP server and enter the range of IP addresses that the
DHCP server can assign to your computers. Disable the DHCP server if
you would like to manually assign IP addresses.
If you have a second IP address and subnet mask for the LAN interface,
click on the checkbox to configure it.