ZyXEL Communications NWD210N - Manual (Page 22)

ENGLISH
21
The following table describes the labels in this screen.
Table 6 The Link Status Screen
LABEL DESCRIPTION
Status This displays the SSID (Service Set IDentifier)
and MAC (Media Access Control) address of
the access point or peer device to which the
NWD210N is connected.
Current
Channel This displays the channel number of the current
wireless connection, as well as the radio
frequency of the channel in megahertz.
Link Speed
(Mbps) This displays the maximum possible data
transmission (tx) and reception (rx) speeds of
the current connection in megabits per second.
Throughput
(Kbps) This displays the actual data transmission (tx)
and reception (rx) speeds of the current
connection in kilobits per second.
Link Quality This shows the quality of the wireless
connection. This refers to the percentage of
packets transmitted successfully. If there are
too many wireless stations in a wireless
network, collisions may occur which could
result in a loss of messages even though you
have high signal strength.