ZyXEL Communications NWD210N - Manual (Page 20)

ENGLISH
19
4.1.4 The Edit Profile: System Configuration Screen
Use this screen to change a profile’s basic settings. Click Edit
in the Profile List screen. The screen that displays is identical
to that described in section
4.1.2 on page 14 .
WPA Pre-
Shared Key When you select WPA-PSK or WPA2-PSK in
the Authentication Type field, enter the
network’s pre-shared key (8~64 uppercase or
lowercase letters and numbers).
Key #1~4 When you select WEP in the Encryption Type
field, you must enter the network’s WEP key.
Check with your network’s administrator for the
correct settings.
Select the key number (1~4), select the key
type (Hexadecimal or ASCII), and enter the
WEP key in the field to the right.
Hexadecimal keys use numerals and the letters
a~f only, whereas ASCII keys use numerals
and all letters.
OK Click this to save your settings and return to the
previous screen.
Cancel Click this to return to the previous screen
without saving your settings.
Table 5 The Add Profile: Authentication & Security Screen
LABEL DESCRIPTION