Yamaha MG166C-USB - Manual (Page 28)

Specifications
MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual
Reference
100
■ Analog Input Specifications
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to
the maximum level. (All faders and level controls are at their maximum position.)
■ Analog Output Specifications
Where 0 dBu = 0.775 Vrms and 0 dBV = 1 Vrms
■ Digital Input/Output Specifications
Input Connectors Gain
Input
Impedance
Appropriate
Impedance
Sensitivity *
Nominal
Level
Max. before
Clipping
Connector Specifications
CH INPUT MIC
(CHs 1–12)
-60 dB
3k Ω
50–600 Ω
Mics
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV) XLR-3-31 type (balanced [1 = GND, 2 =
HOT, 3 = COLD])
-16 dB
-36 dBu
(12.3 mV)
-16 dBu
(123 mV)
+4 dBu
(1.23 V)
CH INPUT LINE
(CHs 1–12)
-34 dB
10k Ω
600 Ω
Lines
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV) TRS phone jack (balanced [Tip = HOT,
Ring = COLD, Sleeve = GND])
+10 dB
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
ST CH MIC INPUT
(CHs 13/14–19/20)
-60 dB
3k Ω
50–600 Ω
Mics
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV) XLR-3-31 type (balanced [1 = GND, 2 =
HOT, 3 = COLD])
-16 dB
-36 dBu
(12.3 mV)
-16 dBu
(123 mV)
-6 dBu
(389 mV)
ST CH LINE INPUT
(CHs 13/14, 15/16)
-34 dB
10k Ω
600 Ω
Lines
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
Phone jack (unbalanced)
+10 dB
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
ST CH INPUT
(CHs 17/18, 19/20)
-34 dB
10k Ω
600 Ω
Lines
-54 dB
(1.55 mV)
-34 dB
(15.5 mV)
-14 dB
(155 mV) Phone jack (unbalanced)
RCA pin jack
+10 dB
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
CH INSERT IN
(CHs 1–12)
— 10k Ω
600 Ω
Lines
-20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
TRS phone Jack (unbalanced [Tip =
Out, Ring = In, Sleeve = GND])
RETURN (L, R) — 10k Ω
600 Ω
Lines
-12 dBu
(195 mV)
+4 dBu
(1.23 V)
+24 dBu
(12.3 V)
Phone jack (unbalanced)
2TR IN (L, R) — 10k Ω
600 Ω
Lines
-26 dBV
(50.1 mV)
-10dBV
(0.316V)
+10dBV
(3.16 V)
RCA pin jack
Output Connectors
Output
Impedance
Appropriate
Impedance
Nominal Level
Max. before
clipping
Connector Specifications
STEREO OUT (L, R) 75 Ω 600 Ω Lines +4dBu (1.23 V) +24 dBu (12.3 V)
XLR-3-32 type (balanced [1 = GND, 2 =
HOT, 3 = COLD])
TRS phone jack (balanced [Tip = HOT, Ring
= COLD, Sleeve = GND])
GROUP OUT (1–4) 150 Ω 10k Ω Lines +4dBu (1.23 V) +20 dBu (7.75 V)
TRS phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
AUX SEND (1–4) 150 Ω 10k Ω Lines +4dBu (1.23 V) +20 dBu (7.75 V)
TRS phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
CH INSERT OUT
(CHs 1–12)
75 Ω 10k Ω Lines 0 dBu (0.775 V) +20 dBu (7.75 V)
TRS phone jack (unbalanced [Tip = Out,
Ring = In, Sleeve = GND])
REC OUT (L, R) 600 Ω 10k Ω Lines -10 dBV (0.316 V) +10 dBV (3.16 V) RCA pin jack
MONITOR OUT (L, R) 150 Ω 10k Ω Lines +4 dBu (1.23 V) +20 dBu (7.75 V)
TRS phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
PHONES OUT 100 Ω 40 Ω Phones 3 mW 75 mW TRS phone jack
Connector Format Data Length Connector Specification
USB USB Audio 1.1 16 bit USB B type