WatchGuard VPN v10.0 - Manual (Page 15)

Administrator Guide 13
Modifying an Existing Mobile VPN Profile
3 Click Edit.
The Edit MUVPN Extended Authentication Group dialog box appears.
Use the following fields to edit the group profile:
Authentication Server
Select the authentication server to use for this Mobile VPN group.
To configure your authentication server, select
Setup > Authentication > Authentication Servers from the menu bar in Policy Manager.
Passphrase
Type a passphrase to encrypt the Mobile VPN profile (.wgx file) that you distribute to users in this
group.
Confirm
Type the passphrase again.
Primary
Select or type the primary external IP address to which Mobile VPN users in this group can
connect.
Backup
Select or type a backup external IP address to which Mobile VPN users in this group can connect.
This backup IP address is optional. If you add a backup IP address, make sure it an IP address
assigned to a Firebox external interface.
Session
Type the maximum time in minutes that a Mobile VPN session can be active.
Idle
Type the time in minutes before the Firebox closes an idle Mobile VPN session.
The session and idle timeout values are the default timeouts if the authentication server does
not return specific timeout values. If you use the Firebox as the authentication server, the