Windsor 10080220 - Manual (Page 17)

ACCESSORY TOOL USAGE
Turn on Pump and Vacuum Switch. Note:
Be sure intermittent/continuous switch is in
center (off) position and brush is in storage
position.
Squeeze handle on accessory tool to begin
cleaning.
STEP
3
STEP
4
STEP
1
Use only one of the following acceptable
accessory tools.
HT – 86000610 PRV NO. 89227
DDH – 86000060 PRV NO. 89226
DH – 86031540 PRV NO. 39504
Pull back collar and insert over machine
mounted fitting, then release collar to lock
into place.
Lift door on front of vacuum shoe and insert
1 ½ inch hose cuff into hole. STEP
2
PUMP VACUUM
ON ON
OFF
CADET 86038220 03/16/07 3-10