Wolverine Siding and Vinyl Carpentry Soffit and Decorative Trim - Manual (Page 54)

Insert a crown molding cap into the crown molding and trace
the shape. Trim as shown.
Insert the header cap.
Cut the crown molding cap in half. Apply each half to the end
of the crown molding and secure it with a bead of caulk.
the crown molding
requires a rain tab 2"
long – cut from the
pocket receiver
apply the crown
molding to the header
with a bead of caulk
rain tab to
divert water
from crown
molding to
side lineals
finished
assembly
53
Wolverine Fit and Finish Installation Guide