Weider 16.8ST - Manual (Page 17)

37. Note: The top weight (not shown) may need to be
lifted to complete this step.
Feed the end of the Low Cable (72) through the indi-
cated slot in the Main Upright (3).
Wrap the Low Cable (72) around a 4Ó Pulley (35).
Attach the Pulley inside the slot in the Main Upright
(3) with a 3/8Ó x 2 1/2Ó Bolt (54), two 3/8Ó Flat
Washers (55), two 5/8Ó x 1/2Ó Pulley Bushings (42),
and a 3/8Ó Nylon Jam Nut (63).
37
Slot
63
42
36. Wrap the Low Cable (72) around a 4Ó Pulley (35).
Attach the Pulley to the front hole in the welded
bracket on the Main Upright (3) with a 3/8Ó x 2Ó Bolt
(62) and a 3/8Ó Nylon Locknut (50).
36
55
35
42
72
3
55
54
3
50
72
62
35
17