White Rodgers SuperStat Pro Programmable Thermostat - Manual (Page 26)

24 SuperStat Pro User Guide
Setting Permanent Holds
Quick Guide Step Description Thermostat Display
Press to change
the setpoint to the
desired
temperature.
1
Be sure your screen shows the normal display. Press the
arrow buttons to change the temperature setpoint higher or
lower.
The HOLD icon below the Day of the Week bar will begin to
flash.
HOLD will flash:
Press once.
2
Press the
HOLD button. The HOLD icon stops flashing,
indicating that you have placed the system on permanent
hold.
To clear the hold, press the
RUN button.
HOLD will stop
flashing: