Wacom Cintiq DTZ-2000W - Manual (Page 56)

Appendix
Page 54
APPENDIX
Caring for Cintiq
Keep the Grip Pen and your Cintiq LCD screen surface clean. Dust and dirt particles can stick to the
pen and cause wear to the display screen surface. Regular cleaning will help to prolong the life of your
LCD screen surface and pen. Keep Cintiq, the Cintiq stand, and the Grip Pen in a clean, dry place and
avoid extremes in temperature. Room temperature is best. Cintiq, the Cintiq stand, and the Grip Pen
are not made to come apart. Taking apart the product will void your warranty.
Important: Take care to never spill liquids onto the pen display tablet or pen. Be especially
careful of getting the display, tablet ExpressKeys, Touch Strips, or pen buttons, tip, and eraser
wet – they contain sensitive electronic parts that will fail if liquids enter them.
Cleaning
To clean the Cintiq casing, the Cintiq display stand, or the Grip Pen, use a soft, damp cloth; you can
also dampen the cloth using a very mild soap diluted with water. Do not use paint thinner, benzine,
alcohol, or other solvents to clean the unit casing or pen.
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When cleaning, apply only
a light amount of pressure to the display screen and do not make the surface wet. Do not use detergent
to clean the display screen; this may damage the coating on the screen. Please note that damage of
this kind is not covered by the manufacturer’s warranty.
Cintiq20WSX_Manual.fm Page 54 Monday, January 15, 2007 9:23 AM