Wacom Cintiq DTZ-2000W User Manual
Page 22
Installation
Page 20
•
As necessary, configure the display control panel settings for the proper size and color resolution.
The maximum (native) resolution of the Cintiq 20WSX is 1680 x 1050 pixels with 24 bit color (8 bits
per color). The display size and color resolution may be constrained by the capabilities of your
video card. See the video card manufacturer’s documentation for details.
•
If you are using analog (VGA) mode, you may want to fine-tune the display. Please refer to
Adjusting pitch and phase (VGA only) on page 39, and to Adjusting the LCD monitor beginning on
page 36 for more information.
For Windows: If you are using Cintiq as a secondary display, you may first need to enable Cintiq in
your Display Properties control panel.
•
After the LCD monitor portion of Cintiq is working to your satisfaction, move on to Step 2: Pen tablet
installation to install the pen tablet portion of Cintiq.
For troubleshooting tips, please refer to page 41.
Notes:
Each Cintiq LCD panel is produced under very stringent quality standards. Production techniques
cannot guarantee an absolutely perfect TFT display, and some panels may exhibit a certain number
of pixels that show an incorrect color. Refer to the specifications on page 62 for more information.
If an image has fine striping (such as screen stripes), it may appear to flicker or display a moiré
pattern.
Do not apply excessive pressure on the display surface, it may cause the appearance of a moiré or
pooling pattern. If you notice this action, use less pressure on the display screen when working
with the pen.
When a still image is displayed for a long period of time, an after-image may remain for a short time.
To prevent this, Wacom recommends using a screen saver or other power management feature.
Important: To extend the life of the backlight, set your computer’s power management to turn
off the display when it is not in use for an extended period of time.
Cintiq20WSX_Manual.fm Page 20 Monday, January 15, 2007 9:23 AM