Windsor ADMIRAL PLUS ADP - Manual (Page 22)

BRUSH DRIVE ASSEMBLY
Belt Replacement
Periodically check the drive belt for wear.
Replace worn or frayed belts before
they break, when possible.
To access the belt remove
the belt cover.
To replace the belt it is
necessary to loosen the motor
and remove the brush.
The “preset” belt tension is
correct when the motor and
belt are securely back in place.
Check pulley alignment and
correct if necessary.
The brush pulley and
motor pulley can
be aligned using a
straight edge.
Ensure that both protective
covers are back in place
before operating
the machine.
22