Wolfgang Puck BRGG0060 - Manual (Page 5)

Using Your Gourmet
Grill / Griddle
Place the appliance on a flat, level surface, such as a countertop or table.
Place the cooking surface onto the base with either the grill or griddle
surface up, according to your recipe.
Insert power point into the power point holder on the grill/griddle plate.
Plug the cord into a 120 volt 60 Hz AC only outlet.
When the grill/griddle is on, the red READY light will come on. This light
is in the shape of an arrow, located on the power point. When the light
goes out, the grill or griddle surface is preheated to the selected
temperature. This light will cycle on and off during cooking, indicating
that the surface temperature is being maintained.
Important: Your grill/griddle comes with a patented safety feature which
will not allow you to plug the temperature probe in unless the drip pan is
properly in place. Never Try To Defeat This Feature.
Care and Cleaning
Before cleaning, be sure to unplug the cord from the outlet. Remove the
power point from the cooking surface. If necessary, wipe the cord with a
damp cloth.
Caution: Do not immerse the cord in water or other liquid.
Allow the appliance to cool completely before cleaning.The cooking
plate and base can be placed in the bottom rack of the dishwasher, or
washed by hand. The drip tray should be hand washed only in warm
soapy water. Dry the drip pan completely when finished.Do not put hot
cooking surface in cold water.
Be sure to always wash both the grill and griddle surfaces after each use
to remove any grease that may have accumulated.
Do not use scouring pads or harsh cleaners on either the cooking
surface or base. If necessary, use a nylon bristle brush or plastic
scrubbing pad.
Do not let the cooking surface or base soak overnight. This could
damage the nonstick coating.
8 7
Grill Scraper Cleaner
Use the slotted side of the cleaning
blade to clean the grill surface. Push
excess grease towards drip holes
Griddle Scraper Cleaner
Use the flat side of the cleaning
blade to clean the griddle surface.
Push excess grease towards drip
holes
Switching Grill Plate
Wait for the unit to completely
cool before moving. Grasp both
handles and lift cooking plate
straight up. Flip over and place
back onto the base
Cleaning Drip Pan
Wait for the unit to completely
cool before moving any parts. The
drip tray should be hand washed
only in warm soapy water. Dry
thoroughly when completed
Washing Grill / Griddle & Base
Wait for the unit to completely
cool before moving. Your cooking
plate and grill base (without drip
pan) is dishwasher safe without the
temperature controller attached.
Place on the bottom rack