Wagner SprayTech 0295001 - Manual (Page 2)

English
Table of Contents
General Description ................................................................2
Safety Precautions ..................................................................2
Grounding Instructions ..........................................................4
Operation .................................................................................4
Purging and Priming ..............................................................4
Operating the Spray Gun ......................................................5
Spraying ...................................................................................6
Spraying Technique ...............................................................6
Practice..................................................................................6
Cleanup ....................................................................................6
Flushing the Unit ...................................................................7
Maintenance ............................................................................7
Daily Maintenance .................................................................7
Maintaining the Fluid Section ................................................7
Cleaning the Spray Tip ..........................................................9
Cleaning the Filter .................................................................9
Replacing the Valve Spring Unit............................................9
Accessories .............................................................................9
Choosing the Correct Spray Gun Filter .................................9
Troubleshooting ....................................................................10
Limited Warranty ...................................................................11
Français .................................................................................12
Español ..................................................................................22
Parts Listings ........................................................................32
Main Assembly ....................................................................32
Stand Assembly...................................................................33
Suction Set Assembly..........................................................33
Drive Assembly....................................................................34
Transducer Assembly ..........................................................35
Relay ...................................................................................35
Pressure Control Assembly .................................................36
Fluid Section Assembly ......................................................37
Spray Gun ...........................................................................38
Prime/Spray Valve Assembly...............................................38
Filter Assembly (optional) ....................................................39
Pressure Control Assembly Wiring Diagram .......................40
General Description
This high performance piston pump is a precision power tool
used for spraying many types of materials. Read and follow
this instruction manual carefully for proper operating
instructions, maintenance and safety information.
ON / OFF Switch
Pressure Control Knob
Suction Set
Return Tube
PRIME / SPRAY Knob
2 © SprayTECH. All rights reserved.
Safety Precautions
This manual contains information which must be read and
understood before using the equipment. When you come to an
area which has one of the following symbols, pay particular
attention and make certain to heed the safeguard.
This symbol indicates a potential hazard which may cause
serious injury or loss of life. Important safety information will
follow.
This symbol indicates a potential hazard to you or to the
equipment. Important information that tells how to prevent
damage to the equipment or how to avoid causes of minor
injuries will follow.
HAZARD: Injection injury - A high pressure stream
produced by this equipment can pierce the skin
and underlying tissues, leading to serious
injury and possible amputation. See a
physician immediately.
DO NOT TREAT AN INJECTION INJURY AS A SIMPLE CUT!
Injection can lead to amputation. See a physician
immediately.
The maximum operating range of the gun is 3000
PSI/207BAR fluid pressure.
PREVENTION:
• NEVER aim the gun at any part of the body.
• NEVER allow any part of the body to touch the fluid
stream. DO NOT allow body to touch a leak in the fluid
hose.
• NEVER put your hand in front of the gun. Gloves will not
provide protection against an injection injury.
• ALWAYS lock the gun trigger, shut the pump off, and
release all pressure before servicing, cleaning the tip or
guard, changing tip, or leaving unattended. Pressure will
not be released by turning off the motor. The
PRIME/SPRAY knob must be turned to PRIME to relieve
the pressure. Refer to the PRESSURE RELIEF
PRESSURE described in the pump manual.
• ALWAYS keep the tip guard in place while spraying. The
tip guard provides some protection but is mainly a warning
device.
• ALWAYS remove the spray tip before flushing or cleaning
the system.
• The paint hose can develop leaks from wear, kinking and
abuse. A leak can inject material into the skin. Inspect
the hose before each use.
• NEVER use a spray gun without a trigger lock and trigger
guard in place and in good working order.
• All accessories must be rated at or above 3000 PSI/207
BAR. This includes spray tips, guns, extensions, and
hose.
NOTE TO PHYSICIAN:
Injection into the skin is a traumatic injury. It is
important to treat the injury as soon as possible. DO
NOT delay treatment to research toxicity. Toxicity is a
concern with some coatings injected directly into the
blood stream. Consultation with a plastic surgeon or
reconstructive hand surgeon may be advisable.
WARNING
NOTE: Notes give important information which should
be given special attention.
CAUTION
WARNING