Watlow Electric 93 User Manual
Series 93, User’s manual, 1/16 din microprocessor-based auto-tuning control
Series 93
1/16 DIN Microprocessor-Based
Auto-tuning Control
0600-0001-0000 Rev C
Made in the U.S.A.
February 1999
$10
Supersedes 0600-0001-0000 Rev B
User’s Manual
Watlow Controls
1241 Bundy Blvd., P.O. Box 5580, Winona, Minnesota USA 55987-5580
Phone: (507) 454-5300, Fax: (507) 452-4507 http://www.watlow.com
Registered Company
Winona, Minnesota USA
ISO 9001
97
TOTAL
3 Year Warranty
CUSTOMER
SATISFACTION
User Levels:
• New User . . . . . . . . . . . . . . . . . . . . . . . . . . .go to page 1.1
• Experienced User . . . . . . . . . . . . . . . . . . . . .go to page 2.1
• Expert user . . . . . . . . . . . . . . . . . . . . . . . . . .go to page 2.1
Installers:
• Installation . . . . . . . . . . . . . . . . . . . . . . . . . .go to page 2.1
• Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .go to page 2.3
Recycled Paper At Least 10% Postconsumer Waste
Document Outline
- Series 93
- Safety Information
- Technical Assistance
- Your Feedback
- Table of Contents
- Meet the Series 93 Team
- Overview of the Series 93
- Install and Wire the Series 93
- How to Use the Key and Displays
- How to Set Up the Series 93
- How to Tune and Operate the Series 93
- Appendix
- Noise and Installation Guidelines
- Noise Sources
- Decreasing Noise Sensitivity
- Eliminating Noise
- Calibration
- Entering the Calibration Menu
- Restoring Factory Calibration
- Calibration Menu
- Thermocouple Field Calibration Procedure
- RTD Field Calibration Procedure
- 0-5 Volt Input Field Calibration Procedure
- 4-20mA Input Field Calibration Procedure
- 4-20mA Output Field Calibration Procedure
- Glossary
- Specifications
- Series 93 Model Number Information
- Index
- Declaration of Conformity
- Series 93 Quick Reference
- Watlow Controls
- How to Reach Us