Hyundai H-CMD7076 - Manual (Page 26)

26
Slow Motion
Press the SLOW button on the remote control to perform slow montion of the video play. SF 1/2 up to 1/8 will be
shown, according to the slowness. Cycle back to normal playback of press the Play/Pause button to resume.
Multi-Angle View
Press the ANGLE button on the remote control to perform multiangle playback. The number of angles change in
sequential order.
Note: The number of angles is different according to the disc.
The function only work for discs having scenes recorded at different angles. When no different angle is recorded, the
OSD will show INVALID KEY
Video System
Press the BND/NP button on the headunit or remote control to choose between NTSC, PAL, PAL60, AUTO,
according to the encoding format of the disc. The default mode is AUTO. Use this function if there is something
wrong about the display function (eg. no color is display).
Programme Mode
Press the PROG button on the remote control to set the program play. Use the Navigation and Digit keys to set the
Chapter and Track no. as your desired sequence. Press Enter to begin the program play. Press the PROG button and
confirm a blank program again to cancel this operation.
Electronic Shock Protection
This unit is programmed with Electronic Shock Protection (ESP) so that the signal will be protected against rough
roads: for DVD - 5 seconds.