Wybron pmn - Manual (Page 22)

22
DMX512 control cable
The DMX control cable from the lighting board to the Power Supply is a
five conductor cable with 5-pin XLR connectors on each end. The
wiring pin out is specified by the USITT DMX512 / 1990 standard.
XLR Pin # Function
1 Common
2 Data -
3 Data +
4 Talkback -
5 Talkback +
Specifications
The Coloram II Power Supply
Connectors:
DMX in: Male 5-pin XLR
DMX out: Female 5-pin XLR
Coloram output: Female 4-pin XLR
DMX512 termination: Terminated and regenerated
Fuse:
24 Way Power Supply - model 19000):
7 amp slow blow at 115 VAC
4 amp slow blow at 230 VAC
12 Way Power Supply (model 19012):
4 amp slow blow at 115 VAC
2 amp slow blow at 230 VAC
6 Way Power Supply (model 19060):
2 amp slow blow at 115 VAC
1 amp slow blow at 230 VAC
Input Power: Automatically accepts 100 - 132 VAC 50/60 Hz and
170 - 240 VAC 50/60Hz
Input Signal: 1990 USITT standard DMX512
LED display: Indicates power, signal, system status, and is used to
configure the system
Power loss DMX bypass relay: Yes
Size:
24 Way Power Supply:
14.66"/372.5mm L x 8.16"/207.4mm W x 5.34"/135.6mm H
12 Way Power Supply:
13.75"/349.2mm L x 7.85"/199.4mm W x 4.05"/102.9mm H
6 Way Power Supply:
12.45"/316.2mm L x 7.60"/193.1mm W x 3.65"/92.7mm H