Wybron pmn - Manual (Page 11)

11
For The CXI color changer:
CXI - Indicates there is a CXI color changer addressed to this channel.
[ /Enter ]
DCV 24.0 - This displays the DC voltage at the CXI.
[ /Enter ]
GLA 0% - This displays the % position of gel string A (farthest from the
mounting plate).
[ /Enter ]
GLB 0% - This displays the % position of gel string B (nearest the
mounting plate).
[ /Enter ]
Fan NORM - This displays the fan status; HI, LOW, or OFF.
[ /Enter ]
Ver x.x - This tells you the software version installed in the Color Changer
set to the channel you are looking at.
[ /Enter ]
Identify - Pressing [ - ] will cause the Color Changer, whose status you
are viewing, to initialize.
For The GoboRam:
GoboRAM - Indicates there is a Gobo Changer addressed to this channel.
[ /Enter ]
DCV 24.0 - This displays the DC voltage at the Gobo Changer.
[ /Enter ]
Pos 000 - This displays the position of the gobo section channel. If the
Gobo Changer is moving the carriers toward FL, an arrow pointing to the
right (>) will be displayed. If the Gobo Changer is moving the carriers
toward 00, an arrow pointing to the left (<) will be displayed.
[ /Enter ]
Rot 000 - This displays the rotational position of the gobo. If the Gobo
Changer is rotating the carriers toward FL, an arrow pointing to the right (>)
will be displayed. If the Gobo Changer is rotating the carriers toward 00, an
arrow pointing to the left (<) will be displayed.
[ /Enter ]
Spin OFF - When the third control channel for this Gobo Changer has a
level of 99 or less, this display will tell you the continuous rotation option is
off. When the third control channel has a level of FL, the display will tell you