Wolf Appliance Company L342212 - Manual (Page 14)

Pro Hood Liner Installation 14
Troubleshooting
IMPORTANT NOTE: If the pro ventilation hood liner does
not operate properly, follow these troubleshooting steps:
• Verify that electrical power is being supplied to the
hood liner.
• Check electrical connections to ensure that the
installation has been completed correctly.
• Refer to the troubleshooting guide in the Wolf pro
ventilation hoods use & care guide.
• If the hood liner still does not operate properly, contact
Wolf factory certified service. Do not attempt to repair
the hood liner yourself. Wolf is not responsible for
service required to correct a faulty installation.
Complete the Installation
INSTALL FILTERS
To install the filters, orient each filter with lines running
vertically. Position the top edge of the filter as shown in
the illustration below. While pressing up against the
spring, rotate the bottom edge of the filter into position
next to the grease cup. Gloves should be worn when
handling filters.
INSTALL LIGHT BULBS
A suction-cup-style light bulb changer is provided with
pro ventilation hood liners. Using this device, push the
light bulb into the receptacle and rotate clockwise one-
quarter turn. Refer to the illustration below.
GREASE CUP
FILTER
SPRING
SIDE VIEW
Filter installation. Light bulb installation.
LIGHT BULB
CHANGER