WhisperKool 17-1103 - Manual (Page 16)

To Use the thermostat:
1. Locate an empty wine bottle.
2. Fill 3/4 full with room temperature tap
water.
3. Place bottle probe securely into bottle.
4. Place bottle with probe level and to the
side of the unit in your wine cellar.
Avoid pulling too much on the probe cord.
It may become disconnected resulting in
non operation of the unit.
Note: Thermostat can be set between 50°F
and 76°F.
Remember : The WhisperKOOL System is
based on the temperature of the water .
Do not be misled by thermostats reading
air temperature. The air temperature in the
cellar will be cooler than the liquid
temperature of the water while it is coming
to optimum balanced temperature.
-14-
LIQUID MEASURING THERMOSTAT
SYSTEM
Room-
temperature
Fill an empty bottle with room-temperature
water; then insert the probe.
All WhisperKOOL units come equipped
with our Precision Digital Technology
(PDT/PDT
JR ) liquid temperature measuring
thermostat system. This system
incorporates the following advantages:
1. Self-Calibrating Probe: The probe
contains a sensor chip, which actually
communicates back and forth to the
thermostat. This results in a consistent
temperature setting and accuracy. Do
not remove the tip from the probe!
2. Built in Defrost Cycle: The unit is
designed to shut off for five minutes
every ninety minutes in order to prevent
frost build up. This allows the cooling
unit to continue to cool effectively in
demanding environments. A count down
timer is observed by depressing the
center button on the thermostat. (PDT
upgrade version only)
3. Heavy-duty Circuitry: The circuitry
within this new unit has been upgraded
to resist power surges, which play
havoc on electrical components. This
improvement will ensure years of
trouble-free use. However, for high
reliability, we still recommend that the
customer install a surge protector for
the unit itself.
4. Fahrenheit and Celsius Readout (PDT
upgrade version only): The thermostat
has the ability to produce the readout in
both Fahrenheit and Celsius for
overseas customers. The readout can be
changed by depressing both the center
and right buttons at the same time.
Measuring liquid temperature has a few
unique advantages:
1. Wine temperature is kept in a very
precise controlled environment. This
assures a consistent temperature.
2. By measuring the liquid temperature
rather than air, the unit will operate 75-
80% of the time. See page 2.