Wasp Bar Code WDT3250 RF - Manual (Page 7)

Wasp Technologies - WDT3250 RF Setup Guide
5
Status Window
The Status window provides status information on the radio. A sample Status window is shown in Figure
3.
Figure 3: Status window
The information available on the Profile screen is listed below:
• Profile: This field lists the active profile.
• Status: This field indicates the radio’s current status. Possible statuses are: Down (not
recognized), Disabled, Not Associated, Associated, or [EAP type] Authenticated
• Device Name: This section lists the following client info: Name, IP address, and MAC address
• AP Name: This section lists the following AP info: Name, IP address, MAC address, beacon period,
and DTIM interval
• Connection Channel: This section lists the following channel info: Channel, data rate, transmit power,
signal strength, and signal quality