Maintenance, Use anti-seize when repairing – Windsor TRIDENT COMPACT TCZOE User Manual
Page 7
MAINTENANCE
Clean
or
Before Starting
the Work Period
*
End of Work
Period
Inspect power cord for wear
Before Storing
*
NOTE:
Drain
Rinse Tanks
*
Inspect
Fan
Foam Breaker
I
I
I
Remove the
Check
the
for Damage and or wear
Clean Squeegee Blades Foam Breaker
*
*
*
Remove lint build-up from screen in the recovery tank well.
Remove tank lid and allow recoverv to
between uses.
Raise Squeegee Assembly
I
I
I
*
*
Inspect Tanks and Hoses
Inspect all Motors for Carbon
Motor Brush wear.
*
*
Check Solution Strainer
I
I
I
Check Casters Wheels for proper lubrication
I
2.
2.
Details on these maintenance items can be found on the following pages.
This cable will lay on wet surfaces. To prevent electrical shock immediatly
replace cords with frayed or cracked insulation.
Periodically inspect the recovery tank and decontaminate if necessary,
using a Hospital Grade
or a 7-70 bleach to water solution.
Wastewater should be disposed of properly.
Occasionally check in line filter screen, rinse with hot water if necessary.
Frayed or cracked hoses should be replaced to avoid vacuum or solution
pressure loss.
3.
4.
LUBRICATION:
The following symbols are found throughout the manual indicating the items
requiring lubrication:
Apply Grease
Use Spray Lubricant.
Thread Locker (Red or blue).
EXAMPLE:
Use Anti-Seize when repairing.
98447 7/1/97
7