beautypg.com

Combustion air supply – Weil-McLain GV Series 3 User Manual

Page 2

background image

Part number 550-110-266/0601

2

GOLD GV Series 3 & 4 — Z-Vent II Venting Supplement

Combustion air supply

Table 1

Corrosive contaminants

Special note

Refer to GV Boiler Manual for sizing free area of combustion/ventilation air openings.
All boilers experience some condensation in section assembly during start-up. Unlike most conventional boilers,
condensation is minimized in the GV Boiler by a built-in mixing system, maintaining boiler return water
temperature above 130

0

F, during steady state operation.

Flue gas condensate is slightly acidic. In most cases pH level is not harmful to vents or drains. When combustion
air is contaminated by vapors from products and areas, listed in Table 1 below, condensate acidic levels increase.
Higher acidic levels attack many materials, including stainless steel commonly used in high efficiency systems.
You may choose to use outside combustion air for any of the following reasons:

Installation is in an area containing contaminants listed in Table 1 below, which will induce acidic
contamination.

You want to reduce infiltration into your home through openings around windows and doors.

Products to avoid

Areas likely to have contaminants

Spray cans containing chloro/fluorocarbons

Dry cleaning/laundry areas and establishments

Permanent wave solutions

Swimming pools

Chlorinated waxes/cleaners

Metal fabrication plants

Chlorine-based swimming pool chemicals

Beauty shops

Calcium chloride used for thawing

Refrigeration repair shops

Sodium chloride used for water softening

Photo processing plants

Refrigerant leaks

Auto body shops

Paint or varnish removers

Plastic manufacturing plants

Hydrochloric acid/muriatic acid

Furniture refinishing areas and establishments

Cements and glues

New building construction

Antistatic fabric softeners used in clothes
dryers

Remodeling areas

Chlorine-type bleaches, detergents, and clean-
ing solvents found in household laundry rooms

Garages with workshops

Adhesives used to fasten building products and
other similar products

To prevent the potential of severe personal injury or death, check for areas and products listed
above before installing boiler. If found:

remove products permanently — OR —

provide outside combustion air

This manual is related to the following products: