Wachsmuth & Krogmann MIQ-FE-65 - Manual (Page 8)

ADJUSTMENTS
Inserting and Removing Saw Blades
The following is a guide for installation and removal of saw blade.
Warning: Before installing or changing a blade, be sure the saw is unplugged from the
power supply.
1. Loosen the two blade lock bolts (use hex key supplied)
enough for a blade to be removed or inserted.
Fig. 1
2. Insert blade in slot with teeth facing forward. The
blade’s top should be inserted far enough to touch
blade clip.
Fig. 2
3. While blade is in fitted slot and touching blade clip top,
tighten the blade lock bolts securely.
Fig. 3
7