Part identification chart – Weider 831.15395.1 User Manual

Page 20

M10 Nylon Locknut (76)

M8 Nylon Locknut (65)

M6 Nylon Locknut (69)

M8 Flange Nut (19)

M8 Washer (59)

M10 Lock Washer (103)

38mm Round Inner Cap (38)

50mm Square Inner Cap (98)

45mm Square Inner Cap (42)

25mm Square Inner Cap (54)

19mm Round Inner Cap (78)

38mm x 64mm Inner Cap (41)

38mm x 76mm Inner Cap (99)

M10 Nut (47)

M10 Washer (75)

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST on the reverse side of this page. Note: Some small

parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

If a part is missing, call toll-free 1-877-992-5999.