Welch Allyn IMAGETEAM 3800 - Manual (Page 67)

7–11 IMAGETEAM 3800 User’s Guide
Industrial Symbology Selections
Interleaved 2 of 5
Interleaved 2 of 5
* On Off
Check Digit
No Check Digit indicates that the scanner reads and transmits bar code data
with or without a check digit.
When Check Digit is set to Validate, but Don’t Transmit, the unit will only read
Interleaved 2 of 5 bar codes printed with a check digit, but will not transmit the
check digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner will only read
Interleaved 2 of 5 bar codes printed with a check digit, and will transmit this
digit at the end of the scanned data. Default = No Check Digit.
Validate, but Don't Transmit * No Check Digit
Validate and Transmit