Welch Allyn IMAGETEAM 3800 - Manual (Page 105)

Section 11 Utilities
11–1 IMAGETEAM 3800 User’s Guide
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded
symbology. (See the Symbology Chart on page 4–5 for the single character code
that identifies each symbology.) This action first clears all current prefixes, then
programs a Code I.D. prefix for all symbologies. This is a temporary setting that
will be removed when the unit is power cycled.
Add Code I.D. Prefix to
All Symbologies
Show Software Revision
Scan the bar code below to output the current software revision.
Show Revision
Show Data Format
Scan the bar code below to show current data format settings.
Data Format Settings