Performance data sheets, Water filtration system, Replacement filter a – Whirlpool WHAB-6015 User Manual
Page 14: Replacement filter b, Replacement filter c, Model whab-6009), Model whab-6010), Model whab-6011)
14
PERFORMANCE DATA SHEETS
® NSF is a registered trademark of NSF International.
Water Filtration System,
models WHAF-0335AB, WHAF-0435AC
Replacement Filter A (
model WHAB-6009)
Replacement Filter B (
model WHAB-6010)
Replacement Filter C (
model WHAB-6011)
The system conforms to ANSI/NSF 42 and 53 for the specific performance claims as verified and substantiated
by test data. The system has been tested according to ANSI/NSF 42 and 53 for reduction of substances listed
below. The concentration of the indicated substances in water entering the system was reduced to a
concentration less than or equal to the permissible limit for water leaving the system, as specified in
ANSI/NSF 42 and 53.
NOTES:
Testing was performed under standard laboratory conditions. System performance may vary according
to local water conditions.
Contaminants listed in this Data Sheet are not necessarily in your water.
We recommend your water be tested to determine treatment requirements.
DATA SHEET REDUCTION CLAIMS
ANSI/NSF STANDARD 42
CARBON FILTER TESTED: Lead/Cyst
Substance
Influent challenge
Avg.
Reduction
concentration
% Rej.
requirement
Chlorine, taste and odor
2.0 mg/L ± 10%
97.5
50%
Particulate, Class I particles
At least 10,000 particles/ml
97.0
85%
0.5 mm to <1 mm
ANSI/NSF STANDARD 53
CARBON FILTER TESTED: Lead/Cyst
Substance
Influent challenge
Avg.
Max. permissible product water
concentration mg/L
% Rej.
concentration mg/L
Turbidity
11 ± 1 NTU
96.50
0.5 NTU
Lead pH 6.5
0.15 ± 10%
99.30
0.010
Lead pH 8.5
0.15 ± 10%
99.30
0.010
VOC*
Refer to pages 17 and 18 for individual contaminant performance data.
Mercury* 0.006
± 10%
96.50
0.002
MTBE*
0.015 ± 20%
94.20
0.005
*VOC, MTBE and Mercury claims only apply when filter WHAB-6011 is use in conjunction with filter WHAB-6009 or WHAB-6010.
Substance
Influent challenge
Avg.
Reduction
concentration %
Rej.
requirement
Cysts
Min. 50,000/L
99.99
99.95%
Asbestos
10
7
to 10
8
fibers/L: fibers
99.00
99.00%
greater than 10 µm in length
NOTE: Certification for Cysts reduction includes Cryptosporidium and Giardia lamblia.
OUTPUT PERFORMANCE
RATED AT CONTAMINANT REDUCTION TEST PARAMETERS
SERVICE FLOW RATE AND CAPACITY
2.3 Liters/minute (0.6 gallon/minute)
Actual rate varies according to water pressure.
Capacity of 4542 Liters (1200 gallons)