VTech gz5838 - Manual (Page 7)

www.vtechphones.com 7
G
ett
in
g s
ta
rte
d
Installation
Removable handset bracket and telephone base plate
Your telephone comes with two additional handset brackets and two telephone base plates . Change
the bracket and plate to suit your mood or match your room decor .
To remove the handset bracket: To install a new handset bracket:
To remove the telephone base plate: To install a new telephone base plate:
2 . Press and slide
it downward to
the bottom of
the handset .
3 . Remove the
bracket by
pulling it out .
3 . Press the bracket on
both sides towards
the center of the
handset until all tabs
are clicked securely
into place .
. Align the two sides of the
bracket and push it upward
to the top of the handset .
2 . Lift up the telephone base
plate away from the slots
on the telephone base .
. Insert your thumb into
the slot at the back of
the telephone base .
. Align the tabs on the back of the new telephone
base plate into the slots on the telephone base and
push downward until they click into place .
. Hold the
two sides of
the handset
bracket .
2 . Push the center part
in towards the bottom
of the handset until it
clicks into place .