Vivitar DVR-508 - Manual (Page 8)

7
Inserting Batteries
Your camcorder requires three (3) AAA batteries. Insert the batteries into the camcorder:
1. Lift and open the cover of the battery compartment on the side of the camcorder.
2. Insert the batteries according to the polarities (+ and -) indicated on the inside of the battery
cover.
3. Replace and close the battery cover.
The battery icon on the bottom left of the LCD will turn red and flash when your batteries are
running low, in which case you will need to replace your camera‟s batteries. When battery voltage
drops to 2.2V, a “Battery Low” message will appear on the LCD and the camera will turn off
automatically.
Note: If you do not intend to use your camera for an extended period, remove the batteries to avoid
battery leakage and corrosion.