Vivitar DVR-508 - Manual (Page 52)

51
Reset All
Using this function will reset the camcorder to the original factory settings.
1. Press the Up/Down button and select the Reset All option from the menu.
2. Press the OK button to enter the Reset All confirmation screen.
3. Press the Up/Down button to highlight and select the Reset All option you desire.
Yes, No
4. If you wish to reset the camcorder select „Yes‟ or „No‟ to cancel the reset.
5. Press the OK button.
6. Press the MENU button to close the menu and exit the Setup function.
Connecting the Camcorder to a TV
Connect the video camcorder to the TV via the supplied cable. Power on the TV and the video
camcorder. Make sure that the camcorder TV Out option is the same as that of the TV set (NTSC or
PAL). The video camcorder
‟s LCD screen turns blank, and the image that previously appeared on
the camcorder`s LCD screen will now appear on the TV screen.
1. Connect the video camcorder to a TV via the TV-out cable (supplied). The TV slot is situated
next to the USB slot at the back of the camcorder. Lift up the cover and insert the cable.