Vivitar ViviCam 8400 User Manual
Page 45
44
Note: The mode you select will appear by default when connecting the
camera to the PC. If you desire the other mode once connected to the PC
press the OK/Menu button to change.
4.
Press the OK/Menu button to confirm and save your choice.
5.
Press the OK/Menu button to exit.
Firmware Version
Select this mode to view the firmware version number for this camera and the last
date that this firmware was updated.
1.
Press the Up/Down button to select the Firmware Version mode.
2.
Press the Right button for the USB Mode details to appear.
3.
Press the OK/Menu button to revert back to the Setup menu.
4.
Press the OK/Menu button to exit.
Install the Vivitar Experience Image Manager Software
Warning: Do not plug your camera into the computer until the software installation is
complete.
You must be connected to the internet to install and run the Vivitar Experience Image
Manager software.
1.
Insert the installation CD into your CD-ROM drive. The installation screen should
automatically open.