Asus P6-M4A3000E - Manual (Page 30)

3-6 Chapter 3: Motherboard info
• For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 200W~250W.
• DO.NOT forget to connect the 4-pin ATX12V power plug; otherwise, the
system will not boot.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
• The ATX 12 V Specification 2.0-compliant (200W~250W) PSU has been
tested to support the motherboard power requirements.
4. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
M4A76T10L DP
M4A76T10L DP ATX power connectors
EATXPWR
PIN 1
+3 Volt
s
+3 Volt
s
GND +5 Volt
s
GND +5 Volt
s
GND Power OK +5V Staudby +12 Volt
s
+12 Volt
s
+3 Volt
s
+3 Volt
s
-12 Volt
s
GND
PSPN
#
GND GND GND
-5 Volt
s
+5 Volt
s
+5 Volt
s
+5 Volt
s
GND
ATX12V
PIN 1
+12V DC
+12V DC GND
GND