VTech CS6329-5 - Manual (Page 33)

29
Telephone operation
Speed dial
You can store up to 10 telephone numbers with names in the speed dial
memory locations you assign from the directory you wish to dial using fewer
keys than usual. You must create an entry in the directory (see page 25)
before you set the speed dial memory location.
The speed dial memory locations are stored in the telephone base and are
shared by all handsets. Changes made to speed dial entries on one handset
apply to all.
Store a speed dial entry
Press MeNU/
SeLeCT
when the handset is not in use.
Press VOL/ or VOL/
CID
to select >DIreCTOrY, then press
MeNU
/SeLeCT.
Press VOL/ or VOL/
CID
to select > SPeeD DIAL, then press
MeNU
/SeLeCT.
4. Press VOL/ or VOL/
CID
to choose the desired speed dial location,
then press
MeNU
/SeLeCT. The directory list displays.
5. Press VOL/ or VOL/
CID
to choose the desired directory entry, then
press
MeNU
/SeLeCT to confirm.
If you choose an existing speed dial entry in step 4, the entry will be
replaced by the new directory entry.
Dial a speed dial number
Press and hold the dial pad key ( 0-9) to display the speed dial entry.
Press / FLASh or to dial the displayed number.
1.
2.
3.
•
1.
2.
If the speed dial location you selected is empty, the screen displays < eMPTY>.
The entries stored in the speed dial memory are numbered 0 to 9 and share
the memory in the directory.
If the location is not empty, the new entry replaces the old entry. The old
entry will still be saved in the directory.
•
•