VTech CS6329-5 - Manual (Page 26)

22
Telephone operation
Intercom
Use the intercom feature for conversation between two
system handsets.
Press INT on your handset when not in use.
If you have a two-handset system, your handset
screen shows CALLING hANDSeT X.
If you have more than two handsets, your screen
shows INTerCOM TO:. Use the dialing keys to
select the destination handset. Your handset screen
shows CALLING hANDSeT X.
The destination handset rings and its screen shows
hANDSeT X IS CALLING.
2. To answer the intercom call, press /
FLASh
, , INT or
any of the dialing keys ( 0-9, #,
TONe
) on the destination
handset. Both handsets now show INTerCOM.
3. To end an intercom call, press OFF/
CLeAr
or place
the handset back in the telephone base or charger. Both screens show
INTerCOM eNDeD.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there will be
an alert tone.
To answer the call, press /
FLASh
. The intercom call ends automatically.
To answer the call without ending the intercom call, press INT. Press INT at
any time to switch back and forth between intercom call and the call.
To end the intercom call without answering the incoming call, press
OFF/
CLeAr
. The telephone continues to ring.
1.
•
•
•
•
•
CALLING
HANDSEt X
HANDSEt X
IS CALLING
INtERCOM
You can cancel the intercom call before it is answered by pressing OFF/
CLeAr
or INT on your originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, your originating
handset screen shows UNABLe TO CALL. TrY AGAIN and returns to
idle mode.
Press
OFF/
CLeAr
or MUTe/
reMOVe
on the destination handset to temporarily
silence the intercom ringer.
You can use a maximum of four handsets at a time. When two handsets are
used on an intercom call, use two other system handsets for an outside call.
If there is an incoming call while the originating handset screen shows
INTerCOM TO:, the intercom request is stopped and the screen will show
INCOMING CALL.
•
•
•
•
•