Audio output, Figure 3-11 . audio output connection, Speakers – Vidikron VP-4200a User Manual

Page 34: Figure 3-12 . connecting speakers, 11. audio output connection, 12. connecting speakers, Figure 3-11, Pre l iminar y

Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

Audio Output: The PlasmaView has a stereo audio output for connection to an external A/V
receiver or powered speakers. The audio signal corresponding to the selected video input is
output to both the speakers and this audio output.

Use a stereo miniplug to connect the PlasmaView stereo audio output to your external audio
equipment; see Figure 3-11.

Figure 3-11. Audio Output Connection

Speakers: The PlasmaView has an internal, 8W per channel stereo amplifier that can drive a
pair of stereo speakers. Connect the

(positive) and

(negative) speaker wires to the EXT

SPEAKER terminals on both the LEFT and RIGHT channels; see Figure 3-12. Maintain the
correct polarity. For more information, refer to the owner’s manual for your speakers.

Figure 3-12. Connecting Speakers

The audio output level is fixed. (The volume and mute controls affect only
the speaker outputs.)

Note

AUDIO AUDIO

INPUT1

AUDIO

OUTPUT

INPUT2

Twist exposed
wire strands
together.

Push tab to the open
position, and insert the
wire. Then, close tab
firmly to secure the wire
in place.